2014 Triumph Daytona 675 ABS for Sale

Chassis

• Riding Position:
• Brakes:
• Swingarm:
• We have improved the riding position by raising the bars slightly and included a 10 mm reduction in seat height. Still a focused supersport riding stance designed to get the best out of you in track conditions.
• Nissin radial calipers on the front, give amazing stopping power and confidence-inspiring feel through the lever. The rear Brembo caliper is lighter than before, helping to reduce the unsprung mass, which further improves handling and agility.
• The 2013 Daytona's new rigid aluminum swingarm was designed asymmetrically to make room for the improved exhaust system. You can still adjust its pivot and personalize the bike's geometry, fine-tuning it to suit your riding style and conditions.
• We sharpened the geometry with a change in the rake from 23.9 degrees to 22.9 degrees and a reduction in trail from 89.1 mm to 87.2 mm. And now, the swingarm pivot position is adjustable so you can tailor the handling more precisely to your riding style and the conditions.
• The new Daytona 675 frame is made from 8 castings. That means fewer welds and a lighter construction with no loss of strength or stiffness for a more focused ride.
• Frame:
• Concentrating as much of the mass of the bike at the center has increased the Daytona 675's agility and grip, so you can achieve higher lean angles through the corners. And you’ll find that the bike now responds even more readily to your input through the handlebars.
• By relocating the silencer to under the engine, rapid direction changes are now more fluid and more controlled. Rider input is rewarded with an incredibly controlled response.
• Mass Centralization:
• The new Daytona 675 is fitted with new, state-of-the-art KYB center-fixed cartridge forks that use an internal damping cartridge which is rigidly located at both ends, rather than floating at one end as in conventional designs. Because it's supported by thinner walls, it has more room for the damping piston, so a larger diameter one can be used, improving damping accuracy.
• Front Forks:
• Something as simple as reducing the weight of the wheels can have a dramatic effect on handling. Lighter wheels reduce unsprung mass and minimize the gyroscopic effect of a spinning wheel. This makes it easier to turn the bike in and hold a line through the corner. We’ve put race-derived Pirelli SuperCorsa tires on to give you the grip to match the potential lean angles.
• Wheels and Tires:
• Front and rear KYB suspension is, of course, fully adjustable. Both front and rear suspension have the added advantage of separate low- and high-speed compression damping adjustment, making the Daytona as forgiving on the road as it is focused on the track.
• Suspension:

Engine

• And when the air passes through the center of the cockpit zone, it gives you even more of that distinctive 3-cylinder intake snarl. And it's not just the volume of the sound that’s better, it's now there over a much wider range of revs for an even more focused, involving ride than ever before.
• We enlarged the through-airflow headstock so that the intake mouth is positioned in the highest pressure zone centrally at the front of the bike. Improving flow efficiency, so that air passes in a straight line through the center of the headstock to the airbox.
• Sound:
• So the new engine now gives you higher power for longer. Bringing even more performance out of the bike as well as bringing more of the rider out of you.
• We built the new Daytona engine with a shorter stroke allowing us to set a 500 rpm higher rev ceiling at 14,400 and we increased power to 128 PS and maximum torque to 75 Nm. The cylinder block is now cast separately from the upper crankcase to cope with higher pressures, more torque and more power.
• Performance:
• This means better efficiency and a boost in torque at low and medium revs.
• With twin injectors per cylinder the new Daytona can draw more fuel quicker when you open the throttle fully and demand more from the engine.
• Internals (injectors, valves):
• We also knew that the weight reduction was enough to give us the space to add some metal to the valves without compromising the valve train, so the top of the valve 'mushroom' heads were reshaped to improve gas flow around the valve and into the combustion chamber.
• A first for a production Triumph, we have now fitted substantially lighter titanium valves to cope better with the higher revs. This also means lighter valve springs can be used, reducing valve train wear and friction.

Equipment and Technology

• This prevents a copy of the correct key being used to switch the bike on.
• To protect your Daytona from the wrong kind of attention, we’ve added a high technology security system. It detects a microchip in the key body and if it's not present the ignition system is disabled.
• Immobilizer:
• With a bike a finely tuned as the Daytona 675, a change in tire pressure can alter handling. Our Tire Pressure Monitoring System will let you know any change in pressure, on the track or on the road, before it becomes an issue.
• Optional TPMS:
• You can remove the already slender number plate and rear indicator mounting quickly for track day use.
• Removable Number Plate and Indicators:
• Programmable Rev Lights:
• Instruments - Computer:
• Slip-assist Clutch:
• Switchable ABS:
• Programmable gear change indicators let you manually set up where in the rev range you want the lights to come on and prompt a gear change.
• Instruments feature a lap timer, 2 trip computers, gear change indicators, shift lights, clock, and can be configured to show tire pressures (where optional Tire Pressure Monitoring System is fitted) and ABS switching. So you know more of what’s going on as you ride.
• The addition of a slip-assist clutch means hard downshifting won’t result in a rear-wheel lock-up. It also serves to make the clutch lever action much lighter and smoother.
• Off the track it's useful for preventing wheel lock-up when hitting a wet patch or after misjudging a corner when braking on a slippery surface such as grass.
• Our new ABS system is switchable and includes a track mode with very late intervention, minimized rear wheel lift control and the facility to slide the rear wheel on the entry to corners.